| |
|
Frequency (Hours of Operation) |
| Module |
Action |
40 |
120 |
360 |
1440 |
Unwind Module
Dancer (Continued) |
Lubricate the following with light penetrating oil:
- Pivot points on linkage
- Air cylinder rod and stand-off
- Potentiometer jackshaft bushing
|
|
|
x
|
|
| Check pulley setscrews for tightness |
|
|
|
x
|
| Check dump valve for operation |
|
x
|
|
|
| Adjust metering valve on regulator |
|
x
|
|
|
| Infeed pacing system |
Check pacing roll for wear and rotation |
|
x
|
|
|
| Check pacing gear and drive gear for security |
|
x
|
|
|
| Check coupling for keys and security |
|
x
|
|
|
| Check gear belt for alignment and wear |
|
x
|
|
|
| Check lash in right angle gearbox |
|
x
|
|
|
| Lubricate all belt tensioners with Mobilith AW-2 grease* |
|
x
|
|
|
| Print stations |
Check alignment of anilox and meter roll |
|
|
x
|
|
| Check anilox roll motors for security |
|
x
|
|
|
| Plate roll pin |
Check plate roll pin for wear |
|
x
|
|
|
| Check length adjustment (ball plunger) |
|
x
|
|
|
| Check side adjustment key for wear |
|
x
|
|
|
| Check 3/32 locking pin for wear |
|
x
|
|
|
| Plate roll throw off |
Check linkage arms for tightness |
|
|
x
|
|
| Check air cylinder shoulder bolt for tightness |
|
|
|
x
|
| Lubricate the following with light penetrating oil:
Air cylinder rod
Lower pivot point
Bronze frame-mounted bearings
|
|
|
x
|
|
| Check adjustment of limit switch to linkage |
|
x
|
|
|
| Check security of spring return system |
|
x
|
|
|
